DURABILITY & ADAPTABILITY
Crafted with a resilient 1.75" aluminum frame and complemented by a sturdy 3/16" aluminum mounting plate, the Transit rear platform is built to last. Let it take your adventures to new heights!
DIY-FRIENDLY INSTALL
The Transit platform works with the rear door hinges and requires just a single hole for installation. Most installations should take less than 90 minutes and are designed to be DIY-friendly.
MOUNT ALL THE GEAR
The Transit Rear Door Platform has all the features you need to stow extra gear. With over 200+ mounting slots and holes, plus an oversized design, there’s room for bikes, boards, MaxTrax and more!
WARNING: This product can expose you to chemicals including lead and lead compounds, DEHP and bisphenol A (BPA) which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information, go to www.P65Warnings.ca.gov.
Customer Reviews
One of the only things we have ever purchased for our van that went as smooth as you’d hope! Such a cool look and so much functionality
Install was easy with just two holes to drill, both with good templates to line them up. The platform has plenty of space for mounting gear and the pre drilled holes should make it easy to attach whatever you need.
Best of all they actually left room behind the platform so you can reach behind and tighten the nuts on what you're mounting. I've installed other platforms that were almost impossible to mount anything without removing the platform first then reinstalling with the additional weight of the gear boxes etc already attached.
Awesome rear platform. There was a slight hiccup during install, but FVCO got back to me super quick and got me taken care of! Definitely going to purchase other items from them.
This install was actually under two hours as stated in the instructions. Usually my projects have a hiccup and end up being two to three times longer then expected. The templates made locating the mounting holes easy. The hardest part was the door backer. Before tightening the bolts on the hinge brackets, I made sure to install the bolt through the platform, through the door and backer. Watching the explorist.life video also helped.
Took me about an hour (with my neighbor) to install. Super easy to put it on. The paper templets made the hole locations super easy. I much rather the unit to the Aluminess unit - the size of the panel gives you more restate to locate your gear. It is not an inexpensive purchase, but once you have your rack you can appreciate the time it takes to design, test, and produce such a quality product!
Great piece of kit. It took an hour to fit and is really well thought out for additional strength ing within the door. Ready for our next road trip.
